You straightened out coins on the side of vending machines?
Yeah, sometimes you needed to rub them up against the side of the machine for a bit if they kept falling through. Not sure how but it seemed to help.
umm, this one is a bit backwards, vending machines still take cash, and old days would only take coins
Banging the top of TVs and other electronics to get them to work right.
My mini fridge still gets one of those from time to time
Percussive Maintenance
I genuinely fixed a PC once doing this. It was stuck in some weird loop where it never got past BIOS and kept rebooting, eventually I got frustrated and was like “Ah fuck you!” and kicked it. It went blank, then beeped and rebooted and went straight to the OS lol. Never did figure out why that worked (presumably a loose something-or-other that got knocked back into place) but that machine ran for another year or so with no more issues until I replaced it.
My current PC doesn’t reliably boot without a good kicking … Which I found out roughly the same way.
Which is totally still used, but perhaps less on TVs.
Definitely. I have drums that won’t work without hitting them.
Right, only daycares and nursing homes. Jk
My aunt and uncle had a then-modern CRT monitor that would occasionally go black & white due to a bad connector. Smacking it restored the color.
The physical degauss
I am a staunch believer in the technical tap
Percusive maintenance.
Command line interfaces
Scotch tape big enough to repair a cassette but not so big that it makes the speakers pop.
Both white and yellow pages in my state had the ink on the side for each letter of the alphabet. Just a black bar that indicates A B C D, etc… I could with fair accuracy open to the right letter and second letter of the person or company I was looking for a telephone number or address. If there was an entry, I had it found in a minute.
To this day I feel like that was a skill lost to the likes of Google and it bothers me when I need to find a phone number and searching and due to corporate greed, I have to sort through a page or 2 of results and ads before I can find what I want.
Apparently reseating RAM before deciding your computer is dead.
At some point people stopped knowing that 90% of hardware problems are resolved by reseating RAM and you’re good again for another thousand years or whatever.
And if it doesn’t work? “Oh, no. You wasted 2 mins and ruled out the RAM.”
To be fair it could be a pain in the ass. My CPU fan is huge and blocks/traps the ram.
Remembering phone numbers, tuning carburetors, setting points, and repairing appliances. I grew up poor and basically in a classic car salvage yard.
You know. In this consumerist timeline thats a shame. If we focused on quality products, longevity and sustainability we would be repair lots of things instead of just filling landfills.
My space heater broke. Need to toss it. $100 to replace it. Just buzzed and does nothing when I turn it on. Have to toss it.
$3k OLED TV has a bad board. It’s 5 years old. Part not available…
It’s all cheaper stuff made to break so you buy a replacement. If parts were more standardized and repair was more accessible we’d all benefit more.
I assume this is also due in part to people not having enough money for a quality product that lasts longer. Boots theory
Luckily, with some things like washers and dryers, as long as you’re not buying smart appliances, parts can be found online pretty easy and replaced with a basic tool set.
My issue is everything is getting more “smart” and when those fancy boards die it’s harder to replace them.
In the US, there’s something called the University Interscholastic League, UIL, which runs sport and academic competitions among middle and high schools. Who’s got two thumbs and won gold for Dictionary Skills? This guy.
who’s got one thumb, played with m-80s, and didn’t finish highschool?

Did you know that every payphone had its own phone number? You could place collect calls from one payphone to another. If your friend was hanging out near the payphone you called, they could accept the collect call charges (which would then go on to the company that owner the payphone). This was how my friends and I would call each other for free when we were in middle school.
I can’t believe I never thought to do that.
What I’d do is collext call my mom and, when orompted to give my name, read off the number of the phone I was at. My mom would heary name, decline the charges, and call me back.
“Bob WehadababyITSaboy”
Glueing 2 pennies together to trick the vending machine into thinking its a £1 coin
I went to India in the early '90s and while there I noticed that the half-Rupee coin was the exact size and weight of a US quarter (it even had the same ridges, which makes me think India purchased a bunch of old quarter presses from the US, but I’ve never found any mention of this). So I brought home a bunch of rolls of half-Rupee coins and used them at the laundromat and in vending machines. At the time, the exchange rate was 35 Rupees to the dollar, which meant each coin cost me about a penny and a half.
I can imagine the laundromat owner getting pissed about the fake quarters and angrily scrutinizing the Indian students who used the place, never suspecting the big white guy.
Wrapping the TV antenna with tin foil and moving it around to get the best reception.
Rolling the window down exactly as far as I want without looking at it, I just know exactly how many times to rotate the handle for it be be in the “right” spot.
Being able to determine whether an answering machine is picking up the call just by the sound of the clicks and hanging up the pay phone fast enough to get your money back.
Coming up with a clever name to give the collect call operator so that your message is conveyed without being charged. “Collect call from Ima Ontheway, do you accept the charges?”
Knowing exactly when to hit the button so that the 8-track starts over instead of flipping to the other side.
Knowing what common household objects can safely and easily be used to rewind a cassette tape. Similarly, exactly how far to manually rewind the tape to get to the spot you want to be. (The rewind function was usually the first thing to break on a cassette player because it’s the most demanding of the motor.)
Knowing exactly when to hit the button so that the 8-track starts over instead of flipping to the other side.
My best friend in high school had something I’ve never seen before or since: a stereo with an 8-track recorder. We would make custom mix tapes on 8-track and take them to parties (in the early '80s some parents still occasionally had the players on their home stereos). This made us deeply unpopular since we liked music that nobody else did, like Laurie Anderson and Yes and Ultravox.
Blind T9 texting
Splicing tape
Selectively overheating an Xbox 360 to get rid of the red ring of death
Oh man! My friend use to charge $20 to fix the RROD. He wouldn’t tell me how he did it, but the fact he would have a disclaimer meant he didn’t really know wtf he was doing. AFAIK he only failed a few times to get them back.
I’m so good at simple arithmetic. I actually use it fairly often to beat the cash register, but it’s mostly a party trick nowadays
Waiting patiently for someone to show up 15, 30m late somewhere. Showing up at the time & place you planned several days before, without having to check in several time.
I hate this. I’d spent an entire day once waiting in a shopping mall hoping beyond all hope I’d get to meet with some old friends whom I informed that I’d be in town that day.
None showed up. The worst part was the serious lack of response.
lock picking. surprised it’s not popular anymore.
Doing the same with coins. I never used on of those new-fangled machines that take bills.