“They hold 50 pounds each. Four times 50 is 200 pounds, this thing can’t weigh more than that. It’ll be fine.”
Hanging shit on walls, and tying shit to the top of a car are two areas my dad passed on a healthy paranoia about to me. It takes me longer to tie a sheet of plywood to the roof rack than it does to drive home from the store. But, I’ve never once lost anything off the roof of my car, and I’ve never had anything come down from a wall like this.
Well and people forget even if the toggle bolt can hold the weight, can the drywall be trusted to?
I’d like to take a moment to say fuck the standard in the box plastic expansion drywall anchors

Every other type of drywall anchor is better and only for a few cents more. These always go in the trash.
EZ Anchors all the way

Almost forgot walls are made out of nothing in North America
Yeah, yeah. “Americans are, stupid they build houses out of wood and paper.”
Y’all stopped building houses out of wood centuries ago, after you cut down and burned all your forests. Also, houses built of wood are more common the world over than any other material. I ran Cat6 through my walls to every room in the house with a drill in the attic and a fishtape, I didn’t need to run conduit on the outside of the walls, or tear open the wall and cut grooves in the brick and concrete. It was easy to do. You don’t see beautiful “art” like this in bathrooms and kitchens in the U.S.:



As an American carpenter, we are (collectively) stupid and our houses really are (on average) much lower quality than Europeans. I try to explain this to my coworkers and they say stuff like “whoa! Somebody’s got high standards!”
I went to Europe last year and everyone’s houses had immaculate cabinetry. Every place had perfect water pressure, their plumbing is on average way better than ours too. Who cares if the pipes and conduits are visible? That just means they’re more accessible to repair.
This is all my professional opinion as someone who actually builds houses. The Europeans are winning so hard, most Americans aren’t even aware of how badly we’re losing.
Europe is a broad spectrum, you have to count gdp in 1960 to80s and you see how the older buildings are much worse off in poorer places even if they’re fine now.
If one will hold it, then 4 is good insurance.
That’s always been my approach to tying/strapping things down, whether on a roof or trailer.
I’ve lost about 25% of all the tie down straps I’ve ever owned. They’re on the road, somewhere. But never a load.
Flex in materials is a bitch.
Now wall anchors are only for light stuff. You want some weight, then I’m doing lags into studs, even if that means I need to mount some wood across studs first.
Lags into studs is how I mount my safes. Nothing else will do.
Speaking of tying things to the roof of a car. I was moving my bed from one house to another but didn’t have a truck to move it. We strapped the bed to the top of our Nissan Versa and drove across town in the middle of the night at like 15 mph. Bed didnt budge.
In the south, the proper way to secure lumber to the roof of the car is with your left hand.
That’s how we carry pine trees home in Canada. Windows open, arms holding it on top, or hanging out the back of your trunk.
Good times.
Its really the companies fault for having walls.
I really doubt whoever is administering the rack is not the one who hung the rack in a commercial location like this.
This is a very anxiety inducing picture isn’t it
Why would you just put the rack on the floor? I would put it on wheels for ease of access but come on bro>?>?>>
Usually for ventilation purposes
No sides open top, its perfectly ventilated unless the room doesn’t have the tonnage to support the heat load. My guess is they thought it looked slick mounted to the wall. And here we are, gravity is a harsh mistress.
I have a similar rack in my house, but even I was smart enough to mount it on plywood.
Similarly, the first computer bug:

Yes toggles are insufficient for this load, but I think the fixtures here are actually my nemesis: screw in plugs.
They’re a flawed premise and really only appropriate for hanging a postcard on brand new gyprock.
The thread is supposed to slice through the gyprock and provide the hold. Gyprock / drywall gets brittle with age so screwing one of those bad boys in just makes it all crumble, even if it doesn’t actually fall apart. The fixture has no strength at all.
Toggles are fine for a curtain rail. Anything else is a lug in a stud.
Personally I only trust good 1/4”-1/2” plywood backing for drywall or some solid redheads for block.
Did you push the thumbtacks all the way in? I bet you didn’t.
wall mount setups should automatically be build with framing stud spacing in.mind
Is that universal?
apparently not, but it should be
Not to ruin the joke, but I don’t actually see a server in this image, just the networking gear, so at the very least, files and things are probably safe
Server cannot serve without no network!
The damage left to the sheetrock doesn’t line up with a ¼" toggle bolt. It most likely was installed with drywall anchors.
Oh 100%. You can still see the anchors attached to the back right side of the rack. Probably the cheapo anchors at that.
Americans and their drywall mountings.
In Africa we attach these suckers to brick or concrete walls with 8x65mm Rawl bolts. Because you never know when someone is going to use your network rack as a ladder to get into the roof space.

We use redheads/drop anchors here too, and I vastly prefer them, if there’s brick or cinder block to mount to.
Stick built garbage is most of what’s built here. Built to be disposable like a razor and plastic forks. Would have to bracket both sides of a stud or use u bolts depending.
I have some wall mounted things that didn’t have a mounting span that matched the studs. So I mounted a 2x4 to the studs and then mounted the thing to the 2x4. Shit isn’t going anywhere.
But I wish it was more like the old mirror where the mounting rings were already spaced the same as the studs because it wasn’t designed either to fail or by someone who either didn’t know or care about how to properly mount something.
This is why the voice data video people are not allowed to mount equipment racks.
Trainee: “Well anyway, I’m gonna clock out. See you on Monday.”